Its a spring loaded arm with a roller that attaches permanently to the column of your pedestal drill. It swings back out of the way until you want to use it.






Activate the WASP In three quick steps

1. grip a drum in the chuck

2. pull the swing arm forward

3. slip on a sanding belt

Why is this important?
Do you know any other drum sander that allows you to change sanding sheets in seconds?
Start with a rough grit to remove material quickly then work through progressively smoother grades till the job is done.

And you can buy the belts in any hardware shop.
Now that is important!

Slip off the belt and you immediately have your drilling machine back.
Now that is important!